Experimental Study on Mechanical Properties and Pore Structure Deterioration of Concrete under Freeze-Thaw Cycles
Kai Zhang1,2, Jing Zhou1,2, Zhigang Yin3
1Institute of Earthquake Engineering, Faculty of Infrastructure Engineering, Dalian University of Technology, Dalian 116024, China.
Abstract:
Understanding the evolution of mechanical properties and microscopic pore structure of concrete after freeze-thaw cycles is essential to assess the durability and safety of concrete structures. In this work, the degradation law of mechanical properties and damage characteristic of micro-structure of concrete with two water-cement ratios (w/c = 0.45 and 0.55) is investigated under the condition of freezing-thawing cycles. The influence of loading strain rate on dynamic compressive strength is studied. The microscopic pore structure after frost damage is measured by low-field nuclear magnetic resonance (LF-NMR) technique. Then, a damage model based on the porosity variation is established to quantitatively describe the degradation law of macroscopic mechanical properties. The test results show that the relative dynamic modulus of elasticity (RDME), dynamic compressive strength, flexural strength, and splitting tensile strength of concrete decrease with the increase of freeze-thaw cycles. Empirical relations of concrete dynamic increase factor (DIF) under the action of freeze-thaw cycles are proposed. Moreover, the experimental results of NMR indicate that the porosity as well as the proportion of meso-pores and macro-pores of concrete gradually increased with the increasing of freeze-thaw cycles. The research results can provide reference and experimental support for the anti-frost design theory and durability life prediction of hydraulic concrete structures in cold regions.
More Related Videos
06:27Expression of Cementitious Pore Solution and the Analysis of Its Chemical Composition and Resistivity Using X-ray Fluorescence
Published on: September 23, 2018
10:00Experimental Protocol to Determine the Chloride Threshold Value for Corrosion in Samples Taken from Reinforced Concrete Structures
Published on: August 31, 2017
Related Concept Videos
Frost Resistant Concrete
Introducing microscopic air bubbles into the concrete mix through air entrainment creates small voids that accommodate ice expansion, thereby reducing internal pressures and preventing cracking. The optimal amount of...
Frost Action on Concrete
This freeze-thaw cycle primarily causes surface scaling, where...
Cold Weather Concreting
To counteract the negative impacts of cold weather, ensuring...
Effects of Air-entrainment in Concrete
Unsoundness of Aggregate due to Volume Change
Microcracking in Concrete
