Related Experiment Video
Updated: Oct 13, 2025

Measuring Phosphorus Release in Laboratory Microcosms for Water Quality Assessment
Published on: July 22, 2019
Fate of phosphorus from treated wastewater in soil-based constructed wetlands
Ania Morvannou1, Matthieu Masson2, Mathieu Gautier3
1INRAE, REVERSAAL, 5 rue de la Doua, CS 20244, 69100 Villeurbanne, France.
Abstract:
In France, soil-based constructed wetlands for the discharge of treated wastewater have become a popular technique to both reduce flow to surface receiving water bodies and perform complementary treatments. This study focuses on the fate of phosphorus in three different soils, as well as its assimilation by Phragmites australis. The experimental set-up consisted of three lysimeters containing three soils selected to be representative of those typically found near wastewater treatment plants (i.e. a silt loam Fluvisol, a sandy loam Fluvisol and a sandy-clay loam Technosol). Lysimeters are undisturbed soil monoliths (1.5 m3 in volume), whose masses are continuously monitored in order to obtain an accurate water mass balance. The lysimeters here were intermittently fed for 3.5 days and then left to rest for 3.5 days. The experiment lasted 26 months, including 18 months of feeding with phosphorus (PO4-P, TP) fluxes in and out being monitored along with water content, oxygen content and redox potential at various depths. The quantities of phosphorus stored in the soils and assimilated in the Phragmites australis were measured. Phosphorus fractionation in soils was performed to better understand its distribution and potential remobilization. Low phosphate concentrations were measured at the outlets of all three lysimeters, thereby highlighting satisfactory phosphorus retention in the three soils (removal efficiencies >90%). A significant amount of phosphorus can be exported by harvesting Phragmites australis aerial parts (26%, 17% and 13% of the yearly incoming phosphorus mass for the silt loam Fluvisol, sandy loam Fluvisol and sandy-clay loam Technosol, respectively). The fractionation step served to determine that the phosphorus retained in the soil was primarily bound to iron oxides/hydroxides, calcium and clay. Moreover, it was found to be preferable to hold oxidizing (aerobic) conditions and pH close to neutral in order to maintain conditions under which the complexes formed with phosphorus remain stable.
More Related Videos
08:09Wastewater Irrigation Impacts on Soil Hydraulic Conductivity: Coupled Field Sampling and Laboratory Determination of Saturated Hydraulic Conductivity
Published on: August 19, 2018
08:21Optimized Procedure for Determining the Adsorption of Phosphonates onto Granular Ferric Hydroxide using a Miniaturized Phosphorus Determination Method
Published on: May 18, 2018
Related Concept Videos
The Phosphorus Cycle
Factors Affecting Solubility
Environmental Applications of Microorganisms