Flexible and Stable Carbon Nanotube Film Strain Sensors with Self-Derived Integrated Electrodes

The development of flexible and wearable electronic devices has put an increasing demand on electrode systems with seamless connection and high compatibility with the main device, in order to accommodate complex deformation conditions and maintain stable performance. Here, we present a carbon nanotube-integrated electrode (CNTIE) by wet-pulling the ends of a carbon nanotube (CNT) film to form condensed thin fibers that resemble conventional conducting wire electrodes. A flexible strain sensor was constructed consisting of the middle CNT film as the main functional part and the CNTIE as self-derived electrodes, with inherent CNT connection between the two parts. The sensor can be transferred to versatile substrates (e.g., balloon surface) or encapsulated in thermoplastic polymers, exhibiting a large linear response range (up to 1000% in tensile strain), excellent durability and repeatability over 5000 cycles, and the ability to detect small- to large-degree human body motions. In addition, the strain sensor based on the CNTIE hybrid film (MXene/CNT and graphene/CNT) also shows superior linearity and stability at a strain range of 0-800%. Compared with the sensors using traditional silver wire electrodes and separately fabricated CNT fiber electrodes, our CNTIE plays an important role in achieving highly stable performance in the strain cycles. Our self-derived integrated electrodes provide a potential route to solve the incompatibility issues of conventional electrodes and to develop high-performance flexible and wearable systems based on CNTs and other nanomaterials.