Sub-30-fs Yb:YAG thin-disk laser oscillator operating in the strongly self-phase modulation broadened regime

We experimentally investigate the limits of pulse duration in a Kerr-lens mode-locked Yb:YAG thin-disk laser (TDL) oscillator. Thanks to its excellent mechanical and optical properties, Yb:YAG is one of the most used gain materials for continuous-wave and pulsed TDLs. In mode-locked operation, its 8-nm wide gain bandwidth only directly supports pulses with a minimum duration of approximately 140 fs. For achieving shorter pulses, a Kerr-lens mode-locked TDL oscillator can be operated in the strongly self-phase modulation (SPM) broadened regime. Here, the spectral bandwidth of the oscillating pulse exceeds the available gain bandwidth by generating additional frequencies via SPM inside the Kerr medium. In this work, we study and compare different laser configurations in the strongly SPM-broadened regime. Starting with a configuration providing 84-fs pulses at 69 W average power at 17 MHz repetition rate, we reduce the pulse duration by optimizing various mode-locking parameters. One crucial parameter is the dispersion control which was provided by in-house-developed dispersive mirrors produced by ion-beam sputtering (IBS). We discuss trade-offs in average power, pulse duration, efficiency, and intra-cavity peak power. For the configuration operating at the highest SPM-broadening, we achieve a minimum pulse duration of 27 fs, which represents the shortest pulse duration directly generated by any ultrafast TDL oscillator. The corresponding full width at half maximum (FWHM) spectral bandwidth exceeds more than five times the FWHM gain bandwidth. The average output power of 3.3 W is moderate for ultrafast TDL oscillators, but higher than other Yb-based laser oscillators operating at this pulse duration. Additionally, the corresponding intra-cavity peak power of 0.8 GW is highly attractive for implementing intra-cavity extreme nonlinear optical interactions such as high harmonic generation.