Determination of Benzophenones in Water and Cosmetics Samples: A Comparison of Solid-Phase Extraction and...

Benzophenones (BPs) are extensively used in a wide variety of cosmetic products and other materials (e.g., textiles or plastics) to avoid damaging effects of UV radiation. In the present work, we compared two extraction methods for the determination of BPs, namely, 2,4-dihydroxybenzophenone (BP-1), 2-hydroxy-4-methoxybenzophenone (BP-3) and 2,2-dihydroxy-4-methoxybenzophenone (BP-8), in water and cosmetics samples. The following extraction methods were used for the research: solid-phase extraction (SPE) and microextraction by packed sorbent (MEPS), whereas analysis was performed by gas chromatography with mass spectrometric detection. A comparison between the methods indicates that the MEPS technique(s) can be reliably used for analysis of BPs (sunscreen residue) in water samples and cosmetic samples with satisfactory results. This microextraction technique is cheap, easy, quick to implement, and consumes small amounts of solvents. On the other hand, the main advantage of the SPE method are low detection limits for the determination of BPs in water samples, i.e., from 0.034 to 0.067 µg L^-1, while, for the MEPS method, LODs were at the level of 1.8-3.2 µg L^-1. For both methods, the recoveries of BPs were 96-107% and 44-70% for water and cosmetics samples, respectively. The presented methods are suitable for use in cosmetics quality control and environmental pollution assessment.