Dual Interface Protection for High Performance and Excellent Long-Term Stability of Organic Solar Cells

Stability is still the main barrier to the commercial application of organic solar cells (OSCs), although the maximal power conversion efficiency (PCE) value has exceeded 19%. The encapsulation technique is an effective and vital way to guarantee the long-term stabilities of OSCs, but it can only avoid the penetration of water and oxygen from the environment. Herein, we introduced a structure that provides dual interface protection by using commercially available and chemically stable polyvinylidene fluoride (PVDF) as the cathode interface protection layer working as the cathode interlayer (CIL) and poly(styrene-comethyl-methacrylate) (PS-r-PMMA) as the anode interface protection layer between the poly(3,4-ethylenedioxythiophene)/poly(styrene sulfonate) (PEDOT:PSS) and the active layer. With this structure, both the migration of impurities caused by degradation of the interfacial layer and the infiltration of oxygen and water in the air can be prevented. PVDF can effectively provide optimal electron transfer by improving the surface potential of active layers and lowering the work function of the Al electrode. PS-r-PMMA can improve the hydrophobicity of PEDOT:PSS and induce optimized phase separation, facilitating charge transfer. After storage in an air environment with a humidity of approximately 60% for 3600 h, the device based on the PM6:IT-4F blend film with dual interface protection showed a decrease in its PCE value from 13.43 to 10.90%, retaining 81.2% of its original PCE value, in contrast to the sharp decrease in the PCE value from 13.66 to 0.74% of the device without dual interface protection. The dual interface protection design could also be useful in the high-performance PM6:Y6 system, which shows a champion PCE of 15.39% and shows potential for the effective fabrication of stable OSCs in the future.