Selective Catalyst Surface Access through Atomic Layer Deposition

Catalyst poisoning is a prominent issue, reducing the lifetime of catalysts and increasing the costs of the processes that rely on them. The electrocatalysts that enable green energy conversion and storage, such as proton exchange membrane fuel cells and hydrogen bromine redox flow batteries, also suffer from this issue, hindering their utilization. Current solutions to protect electrocatalysts from harmful species fall short of effective selectivity without inhibiting the required reactions. This article describes the protection of a standard 50% Pt/C catalyst with a V₂O₅ coating through atomic layer deposition (ALD). The ALD selectively deposited V₂O₅ on the Pt, which enhanced hydrogen transport to the Pt surface and resulted in a higher mass activity in alkaline electrolytes. Cyclic voltammetry and X-ray photoelectron spectroscopy showed that the Pt was protected by the coating in the HBr/Br₂ electrolyte which dissolved the uncoated 50% Pt/C in under 3 min.