[Advances in Pharmaceutical Manufacturing Process Management -From Physical Pharmaceutics to Automatic Pharmaceutical...

Since entering graduate school 43 years ago, I have been studying physical pharmaceutics with a focus on the effects of environmental factors on pharmaceutical properties of solid oral dosage forms during the manufacturing process. I have reported on changes in the characteristics of pharmaceutical products during manufacturing processes, such as grinding, mixing, granulation, and tableting owing to complicated phenomena based on chemical reactions or the crystalline polymorphic transitions of bulk drugs and excipients. To develop modern pharmaceutical manufacturing processes based on process analysis technology (PAT) as a next generation good manufacturing practice, real-time monitoring was introduced in these processes using a non-destructive analytical method, such as the near-infrared spectroscopy combined with chemometrics. Many case studies related to the mixing, granulation, tableting, and coating processes involving PAT have been reported. In those studies, I focused on clarifying the physical and chemical mechanism through "design space" representation. Additionally, non-destructive analytical methods, including X-ray computed tomography, audible acoustic emission, Raman spectroscopy, terahertz spectroscopy, and infrared thermal imaging analysis were applied as novel candidate analytical methods to the pharmaceutical process to monitor critical quality attributes. To achieve this purpose in various pharmaceutical dosage forms, I have been attempting the assembly of a modern manufacturing process managed through a "design space" paradigm involving in-line monitoring using novel analytical methods, multivariate analyses, and feed-back systems.