Related Experiment Video
Updated: Oct 11, 2025

Analysis of the Ambient Particulate Matter-induced Chromosomal Aberrations Using an In Vitro System
Published on: December 21, 2016
Pollution characteristics and risk assessment of air multi-pollutants from typical e-waste dismantling activities
Hailin Wang1, Run Hao1, Lei Nie1
1Beijing Key Laboratory for VOCs Pollution Prevention and Treatment Technology Application, Beijing Municipal Research Institute of Environment Protection, Beijing, 100037, China.
Abstract:
This study investigated the characteristics of air multi-pollutants emitted during typical electronic waste (e-waste) dismantling processes and assessed their risks to the environment and human health. Concentrations of total volatile organic compounds (TVOCs), polybrominated diphenyl ethers (PBDEs), and polycyclic aromatic hydrocarbons (PAHs) in a typical e-waste dismantling workshop were 137 μg/m3, 135 ng/m3 and 42 ng/m3, respectively, which were lower than those without emission control measures. The partial removal of pollutants due to the emission control measures also decreased the ozone formation potential and non-cancer risk of volatile organic compounds (VOCs). In the workshop, the lifetime cancer risk (LCR) of VOCs (8.1 × 10-5) was close to the recommended values. Conversely, the LCR of PAHs (3.6 × 10-5) and the total exposure index of PBDEs (19 ng/d) were remarkably lower than the recommended values of 10-3 and that without emission control measures, respectively. Meanwhile, the concentrations of TVOCs, polychlorinated dibenzo-p-dioxins/furans (PCDD/Fs), PBDEs, and PAHs in the outlet were approximately 10-30 times higher than those in the workshop. In addition, the LCR of TVOCs within a 5-km radius area remained higher than the accepted value (10-6), and the inhalation exposure risk of PCDD/Fs within a 20-km radius area was five times higher than the recommended value. Therefore, the emissions from e-waste recycling processes should be considered as an important source of air pollution, and more efficient control measures should be taken in the future.
More Related Videos
10:31Detection and Recovery of Palladium, Gold and Cobalt Metals from the Urban Mine Using Novel Sensors/Adsorbents Designated with Nanoscale Wagon-wheel-shaped Pores
Published on: December 6, 2015
04:39A Modified QuEChERS-HPLC Method for Detection of Polycyclic Aromatic Hydrocarbons in Zebrafish Embryos Exposed to Fine Particulate Matter
Published on: June 13, 2025
Related Concept Videos
Types of Toxins
Air pollutants, primarily gases, pose significant threats to respiratory health, leading to conditions like hypoxia, lung cancer, and in extreme cases, death.
Environmental pollutants like...
Environmental Applications of Microorganisms
Toxic Reactions: Overview
Toxicity falls into two primary categories: local and systemic.
Local toxicity appears at the exposure site, such as protein denaturation caused by caustic substances.
In contrast, systemic toxicity requires the toxic agent's absorption and distribution,...