Related Experiment Video
Updated: Oct 10, 2025

Finite Element Modeling for the Simulation of the Quasi-Static Compression of Corrugated Tapered Tubes
Published on: January 6, 2023
Deformation Behaviors and Energy Absorption of Composite Re-Entrant Honeycomb Cylindrical Shells under Axial Load
Nanfang Ma1, Qingtian Deng1, Xinbo Li1
1Department of Engineering Mechanics, School of Science, Chang'an University, Xi'an 710064, China.
Abstract:
Composite materials and re-entrant honeycomb structures have superior mechanical performance in energy absorption capacity. Inspired by laminate composite layers, single-layer re-entrant honeycomb cylindrical shells (RHCSs) with different orientations were established, and composite RHCSs were proposed by combining the single-layer RHCSs with different orientations. The deformation behaviors of single layer RHCSs under quasi-static compression were studied by experimentation, and single-layer RHCSs with varying orientations did not show negative Poisson's ratio effects. The energy absorption capacity of single-layer and composite RHCSs was researched using simulation. To analyze the energy absorption capacity, we determined the plateau stress, the mean force and specific energy absorption of single-layer and multi-layer composite RHCSs under different impact velocities; the following conclusions were obtained: compared with the single-layer RHCSs, the multi-layer composite RHCSs, which had the same size, the energy absorption capacity improved significantly under the same impact velocities. The energy absorption capacity of the multi-layer composite RHCSs improved with increasing number of layers under low velocity.
Related Concept Videos
Relation between Poisson's ratio, Modulus of Elasticity and Modulus of Rigidity
Deformation of a Beam under Transverse Loading
The insights from the bending moment diagram extend to...
Plastic Deformations
Bending of Members Made of Several Materials
Hooke's Law determines stress in each material, stating that stress is proportional to strain but varies due to each...
Eccentric Axial Loading in a Plane of Symmetry
Deformation of Member under Multiple Loadings
In the case of a member with a variable cross-section, the strain is not constant but depends on the position. The deformation of an...

