Radiofrequency heating of retained cardiac leads during magnetic resonance imaging at 1.5 T and 3 T

Patients with cardiovascular implantable electronic devices (CIEDs) are often prevented from receiving magnetic resonance imaging (MRI) due to risks associated with radiofrequency (RF) heating of tissue around the implanted leads. Although MR-conditional CIEDs are available, the safety labeling of such devices does not extend to patients with fragmented retained leads (FRLs), where segments of the leads are left in the tissue after the original device is extracted. Unlike intact and isolated leads of CIEDs, FRLs are often bare conductive lead fragments in direct contact with the tissue. No experimental work has been reported that assess RF heating of FRL during MRI thus far. In this work, we performed phantom experiments to measure RF heating of 4 patient-derived FRL models in a gel-based ASTM-like phantom during RF exposure at 64 MHz (proton imaging at 1.5 T) and 123 MHz (proton imaging at 3 T). We found FRL models to generate negligible temperature rise in the gel (∆T<1.84 °C) during a 10-minute scan at both 1.5 T and 3 T. These results are in agreement with previous simulation studies and suggest MRI may be performed safely in patients with fragmented retained leads.