Liquid chromatography-mass spectrometric methods for trace quantification of potential genotoxic impurities in
R K Panchakarla1, P R Ravi2, S Mullangi3
1Department of Chemistry, BITS-Pilani Hyderabad Campus, Jawaharnagar, Hyderabad, Medchal (Dist), Telangana 500078, India.
Objective:
The objective of the current study was to develop and validate the sensitive LC-MS methods for trace analysis of genotoxic impurities in Ivacaftor and Lumacaftor. The first method is for the trace analysis of 2,4-di-tert-butyl-5-nitrophenol in ivacaftor and the second method is for the trace analysis of 1-(2,2-difluoro-1,3-benzodioxol-5yl)-cyclopropane carboxylic acid and 3-carboxyphenyl boronic acid in lumacaftor.
Materials And Methods:
High pure analytical grade solvents and reagents were used for this study. The chromatographic separation was performed on Luna C18 (250×4.6mm, 5.0μm) at a column temperature of 25°C using eluent consisting of acetonitrile and 0.1% v/v formic acid in water in a gradient elution mode. The eluent was run at a flow of 1.0mL/min and injection volume of 20μL.
Results:
The linearity, precision and accuracy of the developed methods was validated over the concentration range of 0.35-15.0ppm for 2,4-di-tert-butyl-5-nitrophenol, 0.30-15.0ppm for 1-(2,2-difluoro-1,3-benzodioxol-5yl)-cyclopropane carboxylic acid and 0.23-15.0ppm for 3-carboxyphenyl boronic acid. In both methods, interference was not observed at the retention time of analyte peaks. All the analytes were found to be stable in solution for a period of 48h.
Conclusion:
The proposed methods are reliable, sensitive, precise, accurate, and robust for the trace level quantification of genotoxic impurities in Ivacaftor and Lumacaftor. These methods can be successfully implemented in the quality control lab for routine analysis.
