Related Experiment Video
Updated: Oct 9, 2025

Construction of a Low-cost Mobile Incubator for Field and Laboratory Use
Published on: March 19, 2019
Integration of solar energy into low-cost housing for sustainable development: case study in developing countries
Hashwini Lalchand Thadani1, Yun Ii Go1
1School of Engineering and Physical Sciences, Heriot-Watt University Malaysia, 1, Jalan Venna P5/2, Precinct 5, 62200 Putrajaya, Wilayah Persekutuan Putrajaya, Malaysia.
Abstract:
The United Nations Development Program reported that two-thirds of the world's population will be living in cities by 2050, which would account for more than 60% of the world's energy consumption. Developing countries experience substantial urbanization and informal settlements compared with other parts of the world. This indicates a paradigm shift in the global energy landscape, which heralds an increase in greenhouse gas emissions. According to Indonesia's National Energy General Plan (PR 22), solar panels are expected to cover at least 25% of rooftops. In Uganda, the Sustainable Energy for All (SE4All) program aims to ensure high penetration of solar energy in the country. This study aims to integrate clean energy into low-cost housing development for sustainable cities in Uganda and Indonesia. We propose an optimal energy system and examine the most significant design parameters that exhibit a desirable performance ratio and energy yield. This project was undertaken in two stages: energy yield estimation and detailed energy system design using two different software programs. Stage 1 aimed to estimate the energy yield based on the available roof area considering existing homes in Uganda and Indonesia. A photovoltaic (PV) array was designed with suitable inverters, tilt angles, and orientations. Stage 2 was intended to determine the optimal tilt angles. Five different PV systems were developed and tested using the optimal tilt angle determined earlier. Finally, an optimizer was integrated into the PV system to investigate potential improvements in the energy yield. The inclusion of an optimizer significantly increased the energy yield from 0.5% to 5.3%. For Uganda, the levelized cost of electricity (LCOE) with and without an optimizer ranged from $0.25/kWh to $0.36/kWh, whereas for Indonesia, the LCOE ranged from $0.25/kWh to $0.3/kWh. The amounts of carbon dioxide reduction were 173.894 t and 122.742 t in Indonesia and Uganda, respectively. The techno-economic outcome of this study serves as a reference model for other developing countries planning similar initiatives that can be replicated with local contextualization and assistive schemes.
Related Concept Videos
Design Example: Sustainability in Concrete Building
There are multiple approaches to achieve sustainability in a commercial concrete building. For instance, construct a concrete parking area under the building, utilizing pervious concrete paver blocks in open areas to facilitate rainwater collection through an underground...
Sustainable Development
P-N junction
Insulation Coordination
Thermal Insulation in Masonry Walls
External insulation can be applied using an Exterior Insulation and Finish System (EIFS), which involves affixing panels of plastic foam to the wall and covering them with a polymeric stucco reinforced with glass fiber mesh....
Power and Energy
Power, defined as the time rate of expending or absorbing energy, is quantified in units called watts (W). The relation between power and energy is mathematically given as

