Thermoplastic cassava starch blend with polyethylene-grafted-maleic anhydride and gelatin core-shell structure...

Thermoplastic starch (TPS) was prepared from cassava starch blended with glycerol (70:30 w/w). Gelatin (Gel) was incorporated into the TPS in water. The TPS/Gel was melt-blended with polyethylene-grafted-maleic anhydride (PEMAH). Maximum tensile strength of the TPS/PEMAH/Gel10 (29.3 MPa) increased significantly compared to the TPS/PEMAH blend (6.3 MPa), while elongation at break was 70%. The morphology of the TPS/PEMAH showed co-continuous morphology, while phase inversion occurred with the addition of Gel. The Gel was dispersed in the TPS matrix and covered the PEMAH. The TPS/PEMAH/Gel was nanoparticles (200 nm) in the TPS matrix. It showed two melting temperatures for PEMAH due to two structures with different crystal sizes. Melt viscosity of the TPS/PEMAH was enhanced with increasing Gel as the reaction induced chain extension. FTIR and rheology measurements confirmed the reaction between -NH groups of Gel and MAH groups of PEMAH. This reaction improved interfacial adhesion, morphology, and the mechanical properties of the blends.