Related Experiment Video
Updated: Oct 9, 2025

A Rapid Synthesis Method for Au, Pd, and Pt Aerogels Via Direct Solution-Based Reduction
Published on: June 18, 2018
Numerical Study of the Influence of Coupling Interface Emissivity on Aerogel Metal Thermal Protection Performance
Fengfei Lou1, Sujun Dong1, Yinwei Ma2
1School of Aeronautical Science and Engineering, Beihang University, Beijing 100191, China.
Abstract:
For aerogels in metal thermal protection system (MTPS), radiative heat transfer will participate in the thermal transport process. Therefore, the influence of the emissivity of the coupling interface between metal and aerogels on thermal insulation performance is considered an important research focus. In this paper, CFD numerical simulation is performed to study the influence of emissivity on the performance with different extinction coefficients at different boundary temperatures. The finite volume method and the discrete ordinate method are used to solve the govern equations. The results show that when the boundary temperatures are 600 K and 2100 K, the extinction coefficient is 50 m-1, and the reduction percentage of the effective thermal conductivity with an emissivity of 0.2 can be up to 47.5% and 69.8%, compared to the system with an emissivity of 1. Thus, the reduction in emissivity has a good effect on the thermal insulation performance of the MTPS at a higher boundary temperature for materials with small extinction coefficients.
More Related Videos
Related Concept Videos
Mechanism of heat transfer
Mechanisms of Heat Transfer II
Conduction, Convection and Radiation: Problem Solving
In order to solve a problem related to heat transfer, first of all, the situation needs to be examined to determine the type of heat transfer involved. This could...
Mechanisms of Heat Transfer
Conduction, accounting for approximately 3% of body heat loss at rest, is the process of exchanging heat between molecules of two materials in direct contact. This can result in both heat loss and gain. For instance, when the body is submerged in water, which conducts heat 20 times more effectively than air, it can either lose or gain significant...
Thermal Insulation in Masonry Walls
External insulation can be applied using an Exterior Insulation and Finish System (EIFS), which involves affixing panels of plastic foam to the wall and covering them with a polymeric stucco reinforced with glass fiber mesh....
Mechanisms of Heat Transfer I

