Related Experiment Video
Updated: Oct 8, 2025

Two-way Valorization of Blast Furnace Slag: Synthesis of Precipitated Calcium Carbonate and Zeolitic Heavy Metal Adsorbent
Published on: February 21, 2017
Experimental study on the washing characteristics of fly ash from municipal solid waste incineration
Mi Yan1, Jiahao Jiang1, Rendong Zheng2
1Institute of Energy and Power Engineering, Zhejiang University of Technology, Hangzhou, China.
Abstract:
The disposal of fly ash with high salt content has become an important bottleneck for the further application of municipal solid waste incineration (MSWI). In this study, the soluble salt content and composition of fly ash from different MSWI were analysed. The composition of fly ash was affected by incinerator type and flue gas cleaning system, especially the type of deacidification solvent. The soluble salt content in fly ash from MSW grate incinerator can be over 35.16%. Most of the soluble salt was calcium salt and chloride salt. The effect of washing parameters including liquid/solid (L/S) ratio and washing time on salt removal from fly ash were studied. Raw fly ash contained high chlorine (Cl) with the maximum of 19.83% and it can be significantly reduced by washing. Double-washing and secondary-washing had better performance than single-washing on salt removal. The secondary-washing did not only save water, but also reduced the energy cost during evaporation for crystallising soluble salt. Based on the analysis of variance (ANOVA), L/S ratio was the most principal factor for salt and Cl removal of fly ash by washing.
More Related Videos
Related Concept Videos
Pozzolans
Fly ash is...
Sample Preparation for Analysis: Advanced Techniques
Acid digestion with strong acids is commonly used to dissolve inorganic materials that are insoluble (do not dissolve) in water. This method can be useful for...
Testing Water Quality
Fineness of Cement
Direct...
Design Example: Managing Concrete Workability

