[Effects of Carriers on ANAMMOX Sludge Activity Recovery and Microbial Flora Characteristics]

In order to realize the rapid recovery of ANAMMOX sludge bacterial activity after long-term room temperature storage, three groups of reactors were added to ANAMMOX sludge that had been stored without substrate at room temperature (15-30℃) for 9 months. Among the three groups of reactors, comet fiber carrier and K3 carrier were added to R2 and R3 reactors, respectively, as biological carriers. The effects of different carriers on the recovery rate of ANAMMOX sludge bacterial activity were investigated. The results showed that ANAMMOX reactions in the R2 and R3 reactors began taking place on the 8th and 10th day, respectively, with respective TIN removal rates of 82.25% and 80.92%, which were significantly improved compared with that in the R1 reactor, in which no carrier was added (ANAMMOX reaction started occurring on the 15th day with a TIN removal rate of 80.26%). After 42 days with influent, ρ(NH₄⁺-N) and ρ(NO₂^--N) respectively increased to 300 mg·L^-1 and 396 mg·L^-1, and the TIN removal rates of the three groups of reactors were respectively 78.96%, 84.92%, and 84.66%. Microbial community structure analysis showed that the relative abundances of ANAMMOX bacteria in the R2 and R3 reactor were respectively 6.85% and 6.06%, two to four times that in the R1 reactor. The predominant ANAMMOX bacteria in the sludge was Candidatus Jettenia, whose relative abundances in the three groups of reactors were respectively 1.62%, 5.74%, and 5.21%. The results show that ANAMMOX biofilm-granular sludge complex systems constructed by adding carriers can considerably shorten the time for recovering ANAMMOX sludge bacterial activity after long-term room temperature storage without substrate. The carriers effectively promoted the relative abundances of ANAMMOX bacteria in the reactors, whereas the promoting effect of comet fiber carrier was slightly more significant than that of the K3 carrier.