PDMS-Parylene Hybrid, Flexible Micro-ECoG Electrode Array for Spatiotemporal Mapping of Epileptic...

Epilepsy detection and focus location are urgent issues that need to be solved in epilepsy research. A cortex conformable and fine spatial accuracy electrocorticogram (ECoG) sensor array, especially for real-time detection of multicortical functional regions and delineating epileptic focus remains a challenge. Here, we fabricated a polydimethylsiloxane (PDMS)-parylene hybrid, flexible micro-ECoG electrode array. The multiwalled carbon nanotubes (MWCNTs)/poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) nanocomposite-modified electrode interface significantly improved the sensing performance with low impedance (20.68 ± 6.65 kΩ), stable phase offset, and high sensitivity. The electrophysiological activities of multicortical brain regions (somatosensory cortex, parietal association cortex, and visual cortex) were simultaneously monitored during normal and epileptic statuses. The epileptic ECoG activities spread spatiotemporally from the starting point toward the adjacent cortex. Significant variations of the waveform, power, and frequency band were observed. The ECoG potential (123 ± 23 μV) at normal status was prominently up to 417 ± 87 μV at the spike wave stage. Besides, the power for epileptic activity (11.049 ± 4.513 μW) was 10 times higher than that (1.092 ± 0.369 μW) for normal activity. In addition, the theta frequency band was found to be a characteristic frequency band of epileptic signals. These joint analysis results of multicortical regions indicated that the active micron-scale region on the parietal association cortex was more likely to be the epileptogenic focus. Cortical mapping with high spatial detail provides the accurate delineation of lesions. The flexible micro-ECoG electrode array is a powerful tool for constructing a spatiotemporal map of the cortex. It provides a technical platform for epileptic focus location, biomedical diagnosis, and brain-computer interaction.