Carbonized Cellulose Nanofibril with Individualized Fibrous Morphology: toward Multifunctional Applications in...

Drying cellulose nanofibril (CNF) from aqueous suspensions often leads to aggregated fibril morphology, negatively affecting its performance in ensuing applications. In this work, we introduced a new solvent drying approach to acquire dry CNF from aqueous suspensions and subsequently pyrolyzed the CNF precursor to obtain carbonized CNF (CCNF) without loss of its fibrous morphology. The fibrous CCNF was dispersed homogeneously in polycaprolactone (PCL) thermoplastic resin, greatly enhancing PCL composite tensile performance. After being further mixed with carbon black (CB), the CCNF helped to minimize CB aggregation due to formation of interconnected three-dimensional (3D) structures. The CCNF/CB/PCL composite exhibited superior electrical conductivity ascribed to electrons transporting more efficiently among CB aggregates. The composite is also suitable for applications such as 3D printed electromagnetic interference (EMI) shielding and deformation sensing. Specifically, the 3D printed EMI shielding composite efficiently absorbed EM radiation in the frequency range of 4-26 GHz, and the 3D printed deformation sensor exhibited excellent sensitivity, durability, and flexibility in monitoring mechanical distortions. Herein, this study sheds light on the development of multifunctional conductive composites embedded with fibrous CCNF from sustainable resources.