Simultaneous control of sulfide and methane in sewers achieved by a physical approach targeting dominant active zone...

Sewer sediments not only induce sewer blockages, but also contributes to significant sulfide and methane productions in gravity sewer systems. Chemical control of sulfide and methane production is extremely expensive. This study aims to propose a novel physical control approach-intermittent surface sediment flushing to synchronously address sediment-induced multiple issues. The proposed approach was established investigating the suppression and recovery characteristics of sulfidogenic and methanogenic activities of sediments including the in-situ activity analysis by using the diffusive gradients in thin films (DGT). The results showed that ∼70% of total sulfide and methane production in sediments was contributed by surface sediments (0-1.5 cm), which could be easily flushed away by a low shear stress (<0.1 N/m²). Surface sediment flushing resulted in an immediate reduction in sulfidogenic and methanogenic activities, which both required about one week to recover to 50% of the maximum. These novel insights hopefully provide a feasible approach, i.e., intermittent surface sediment flushing, to effectively reduce sulfide and methane production in sewers. Compared with chemical dosing methods, the proposed approach, which has no chemical input, greatly reduces operating cost and environment impact. Moreover, intermittent surface flushing is expected to keep sediment thickness within a certain range to alleviate sewer blockage.