Potential of Xylanases to Reduce the Viscosity of Micro/Nanofibrillated Bleached Kraft Pulp

The generally high viscosity of micro/nanofibrillated cellulose limits its applications in cream and fluid products. A bleached softwood Kraft (BSK) pulp was refined with increasing energy (500-2500 kWh t^-1) to produce micro/nanofibrillated cellulose (MNBSK). Subsequent xylanase treatment was shown to influence the viscosity, gel point, aspect ratio, and fiber surface morphology of the MNBSK. It was apparent that the accessibility to xylanases was increased even at low refining energies (500 kWh t^-1). Depending on the initial degree of cellulose fibrillation, xylanase treatment decreased the viscosity of the MNBSK from 4190-2030 to 681-243 Pa·s at a shear rate of 0.01 s^-1, corresponding to the reduction in the aspect ratio from 183-296 to 163-194. It was likely that the xylanases were predominantly acting on the xylan present on the fiber surfaces, reducing the cross-linking points on the cellulose fibers and consequently resulting in the reduction in MNBSK viscosity.