Related Experiment Video
Updated: Oct 6, 2025

Two-way Valorization of Blast Furnace Slag: Synthesis of Precipitated Calcium Carbonate and Zeolitic Heavy Metal Adsorbent
Published on: February 21, 2017
Ion exchange and adsorption of cadmium from aqueous media in sodium-modified expanded vermiculite
Henrique Santana de Carvalho Neves1, Thiago Lopes da Silva2, Meuris Gurgel Carlos da Silva1
1Department of Processes and Products Design, School of Chemical Engineering, University of Campinas, Albert Einstein Avenue, 500, Campinas, São Paulo, 13083-852, Brazil.
Abstract:
The use of mineral clays as alternative adsorbent has received attention due to their physicochemical characteristics, superficial negative charge, abundance of vermiculite (especially in Brazil), low cost, and chemical composition, which allows the material modification to increase the adsorptive capacity. This manuscript evaluated the use of expanded vermiculite (EV) and sodium-modified vermiculite (VNa) in the adsorption and ion exchange of Cd2+ ions. The sodification was successfully carried out making the ion exchange capacity greater in the modified clay, confirmed by EDX, cation exchange capacity (CEC), DRX, and FTIR analysis. The CEC was 210 and 233 mEq/100 g for the EV and VNa, respectively, with 97.8% exchangeable ion (Na+) in the VNa. FTIR spectra showed small variations in the groups related to ion exchange and XRD analysis indicated changes in the distance of the layers with loss of crystallinity after clay modification, which was recovered after cadmium adsorption. The kinetics became faster with an equilibrium time of 10 min for VNa and 45 min for EV. Cd2+ removal by vermiculite above 99% was achieved. Pseudo-second order model best described the kinetics, in which the resistance to mass transfer in external film is the limiting step of the process and, once this resistance is overcome, the ion exchange happens quickly. Despite the decrease in surface area after sodification, the adsorptive capacity increased 158% in the sodified adsorbent, from 0.107 mmol/g for EV to 0.276 mmol/g for VNa, under the evaluated conditions.
More Related Videos
10:44Preparation of Biomass-based Mesoporous Carbon with Higher Nitrogen-/Oxygen-chelating Adsorption for CuII Through Microwave Pre-Pyrolysis
Published on: February 12, 2019
08:34A Dual-Functional Electroactive Filter Towards Simultaneously SbIII Oxidation and Sequestration
Published on: December 5, 2019
Related Concept Videos
Extraction: Advanced Methods
Ion Exchange
Masking and Demasking Agents
There are many masking agents, such as cyanide, fluoride, triethanolamine, thiourea, and 2,3-bis(sulfanyl)propan-1-ol (formerly 2,3-dimercapto-1-propanol), with the masking agent chosen based on...
Voltammetry: Stripping Methods
Anodic Stripping Voltammetry (ASV)
ASV is used to determine metals and metalloids at trace levels. It involves two steps: deposition and stripping. First, a negative potential is applied to the...