Significance of using dynamic land-use data and its threshold in hydrology and water quality simulation models

Land-use changes have a significant impact on the hydrological cycle and non-point source (NPS) pollution discharge and transport. Thus, using dynamic land-use inputs in the simulation models is important. However, there is currently no clear standard for which situation the land-use data should be updated in the models. In this study, we quantified the impacts of land-use change on hydrological and NPS pollution simulation outputs, and analyzed the thresholds for land-use change level and time nodes. The results indicated that the error caused by land-use change had a linear relationship with the land-use change level. The total nitrogen (TN) output error was the most sensitive to land-use change, with a gradient of 0.73. The impact of land-use change on the model outputs was different at different temporal scales. Flow and TN had the highest output errors at a daily scale, while sediment had the highest output error at an annual scale. The threshold analysis results revealed that the land-use change thresholds for the flow, sediment, and TN simulations were 40%, 30%, and 10%, respectively. When the land-use change level exceeded the threshold, the model simulation error increased dramatically. The land-use change time node would also affect the simulation performance, especially for TN. This study initially explored the quantified standard for land-use data updates in the SWAT model. The results could be useful for improving the simulation accuracy of the SWAT model and may provide ideas for follow-up studies.