[Effects of Three Illuminants on the Color of High Translucent Multilayered Zirconia]
Sheng-Tao Yang1, Mi Zhou2, Quan Yuan1
1State Key Laboratory of Oral Diseases, National Clinical Research Center for Oral Diseases, West China Hospital of Stomatology, Sichuan University, Chengdu 610041, China.
Objective:
To evaluate the effects of three common illuminants on the color of four brands of high translucent multilayered zirconia (HTMZ) ceramics so as to provide reference for clinical practice and dental restoration fabrication, and to reduce the risks for illuminant change causing color mismatch between the natural teeth and the restorations made of HTMZ.
Methods:
Four brands of commonly used HTMZ were selected and ten cuboid samples ( n=10/group) of 12 mm×10 mm×0.8 mm were prepared for each type of HTMZ. The L*, a*, and b* values of the samples were measured under D65, A and F2, three standard illuminants. Then, the L*, a*, and b* values were statistically analyzed by using factors of the type of the illuminant and the brand of the zirconia. Color difference (ΔE) of samples of the same brand under exposure to changed illuminants was also calculated.
Results:
When the same samples were exposure to different illuminants, there was no significant difference in the L* value, the a* value for the different iluminants was shown to be illuminant A>illuminant F2>illuminant D65, and the b* value was shown to be illuminant F2>illuminant D65>illuminant A. The L*, a*, and b* values of samples of different brands showed statistically significant difference when they were exposed to the same illuminant ( P<0.0001). Samples of the same brand showed ΔE when they were under the three different illuninants, and all ΔE were clinically acceptable.
Conclusion:
The types of illuminant used, to a certain degree, affected the hue and chroma of HTMZ. There were colorimetric differences between restorations made of different brands of HTMZ ceramics of the same color. The types of illuminants most common to the daily life of patients and the color characteristics of materials of different brands should be taken into consideration to facilitate the selection of restoration materials and dental restoration fabrication, and to reduce the risks for color mismatch between the restorations and the adjacent teeth caused by the change of illuminants.
