Optimization of Spray-Drying Process Parameters to Study Anti-Sticking Effect of Hydroxypropyl Methyl Cellulose-VLV...

To prevent the sticking of Corni fructus extract (CFE) during spray drying, the anti-sticking effects of different excipients were compared. Hydroxypropyl methylcellulose (HPMC)-VLV showed a higher powder yield at a lower dosage (8% of total solids), and a lower solution viscosity, compared with HPMC-E5. Therefore, HPMC-VLV is a more effective excipient for reducing CFE sticking during spray drying. The spray-drying process parameters were optimized by central composite rotatable design/response surface methodology, and spray drying was conducted under the following conditions: Inlet air temperature, 126 °C; atomization pressure, 1.05 bar; pump speed, 7.7 mL/min. Scanning electron microscopy showed that the powder comprised shrunken spherical particles with particle sizes in the range of 2-30 μm. Analysis of dynamic surface tension and chemical elements on the powder surface showed that HPMC-VLV rapidly moved to the droplet surface owing to its surface activity. HPMC covered the droplet surface and reduced surface tension, achieving an anti-sticking effect. In conclusion, HPMC-VLV at a solid content of 8% significantly improved the spray drying and reduced sticking of CFE. The spray-drying process parameters were nonlinearly related to the dry product yield. Graphical Abstract.