High-Frequency TiO₂ Nanotube-Adapted Microwave Coplanar Waveguide Resonator for High-Sensitivity Ultraviolet...

Ultraviolet (UV) sensors are a key component in growing applications such as water quality treatment and environmental monitoring, with considerable interest in their miniaturization and enhanced operation. This work presents a passive gold coplanar waveguide split ring resonator integrated with anodic self-organized TiO₂ nanotube (TNT) membranes with a thickness of 20 μm to provide real-time UV detection. The resonator operated as a one-port device to capture the reflection coefficient (S₁₁) signal, with a center frequency of 16 GHz and a notch amplitude of -88 dB. It was experimentally analyzed for its UV sensing capability in the range of 36.5-463 μW/cm². The high-frequency resonator was improved through design choices including the addition of a tapered input transmission line, wire bonding for practical device design, and an interdigitated capacitive ring gap. The high frequency also helped mitigate noise due to water vapor or environmental contaminants. S₁₁ amplitude variation was found through both experiments and modeling to follow a linear trend with UV illumination intensity. The resonator exhibited over 45 ± 2 dB shift in the resonant amplitude under the highest UV illumination conditions, with a sensitivity of 0.084 dB/μW cm^-2 and the potential to sense UV intensity as low as 2.7 μW/cm². The presented device enabled a repeatable and accurate microwave response under UV illumination with very high sensitivity, entirely through the use of passive circuit elements.