Evaluation of Fe(VI)/Fe(II) combined with sludge adsorbents in secondary effluent organic matter removal

Wastewater reclamation and reuse are important methods that help to achieve an equilibrium within demand and offer, and also one of the important ways to reduce carbon emission. The existence of secondary effluent organic matter (EfOM) will bring potential threat to the environment in reuse process. Therefore, it is important to develop reclaimed water reuse technology that effectively remove EfOM. In this study, the removal of EfOM performance of ferrates enhanced by FeCl₂ (Fe(VI)/Fe(II)) combined with sludge adsorbents (SAs) was evaluated by using the continuous-flow process (FeSDF), which was composed of Fe(VI)/Fe(II), SAs, densadeg and filtration. The results showed that when the inflow rate was 1 L/h, the optimal operating conditions of FeSDF including 5 mg/L of Fe(VI), 1 mg/L of Fe(II), 1 g/L of SA and 50% of the reflux ratio. Bulk organic indicators, including chemical oxygen demand, dissolved organic carbon, ammonia, total nitrogen, total phosphorus, turbidity, and ultraviolet absorbance at 254 nm in the effluent met the water quality standard for scenic environment use (GB/T 18921-2019 in China). The addition of Fe(II) makes the coagulation process by Fe(VI) produce more Fe(III) and produce more quality of sedimentary flocs and improve the removal efficiency of EfOM. The removal of organic micro-pollutants (OMPs) was mainly due to ferrate oxidation and SA adsorption in FeSDF, and the removal of most of the OMPs was more than 90%. The total fluorescence intensity removal efficiency in FeSDF was 63.8%. Moreover, the genotoxicity of the FeSDF effluent decreased to 0.73 μg 4-nitroquiniline-N-oxide/L, and the reduction efficiency reached 97.6%. The actual efficiency of most of the indicators is greater than the expected efficiency, indicating that there is a synergistic comprehensive effect during the whole process operation of FeSDF.