Related Experiment Video
Updated: Oct 5, 2025
Low Pressure Vapor-assisted Solution Process for Tunable Band Gap Pinhole-free Methylammonium Lead Halide Perovskite Films
Published on: September 8, 2017
Efficient and Stable Methylammonium-Free Tin-Lead Perovskite Solar Cells with Hexaazatrinaphthylene-Based
Huanxin Guo1, Huidong Zhang1, Shuaijun Liu1
1Key Laboratory for Advanced Materials and Shanghai Key Laboratory of Functional Materials Chemistry, Frontiers Science Center for Materiobiology and Dynamic Chemistry, School of Chemistry and Molecular Engineering, East China University of Science and Technology, Shanghai 200237, China.
Abstract:
Incorporating non-aqueous hole-transporting materials (HTMs) to replace the widely used PEDOT:PSS is favorable for improving the stability of tin-lead perovskite solar cells (Sn-Pb PSCs). Herein, hexaazatrinaphthylene (HATNA) is found to be a promising HTM building block for Sn-Pb PSCs. By introducing triphenylamine (TPA) and methoxy-triphenylamine into the HATNA core, molecular energy levels and surface wettability can be well regulated, and a high hole mobility and thermal stability can be maintained. Moreover, a homogeneous Sn-Pb perovskite film with low Sn4+ contents and vertically orientated grains can be prepared on the substrate TPA-HATNA. Compared with PEDOT:PSS, the optimal TPA-HATNA-based methylammonium-free device enables a 70 mV increase in VOC, delivering a remarkable PCE exceeding 18% (certified 16.4%). Impressively, the TPA-HATNA-based devices without encapsulation retain 90% efficiency after aging for 600 min under maximum-power-point tracking. Our work provides alternative HTMs for boosting the performance of Sn-Pb PSCs.
