Related Experiment Video
Updated: Oct 5, 2025
Sound Source Localization Testing in Single-sided Deafness Following Bone Conduction Intervention
Published on: December 20, 2024
Calibrating different sounds for sound therapy: A general guide
N A Amirullah1, S Rahmat2, A A A Dzulkarnain1
1International Islamic University Malaysia, Kulliyyah of Allied Health Sciences, Department of Audiology and Speech Language Pathology, Kuantan, Pahang, Malaysia.
Introduction:
Sound therapy is one of the complementary or alternative interventions for various populations. The intensity of the sounds for sound therapy needs to be properly calibrated to ensure their accuracy and effectiveness. This paper aims to provide a general guideline for calibrating sound files using free software, specifically Audacity®.
Materials And Methods:
Six sounds (broadband noise, rain, ocean, waterfall, Quranic chapters Al-Fatihah, and Yasin recitations) were calibrated at the intensity levels of 45, 50, 55, 60, 65, 70, 75, and 80dBA. The sounds were delivered through a pair of Sennheiser HD 280 Pro headphones connected to the Sound Blaster X-Fi Surround 5.1 Pro sound card. The long-term average of the sound pressure level over the time of recording (LAseq) was recorded using the 3M SoundPro Class 1 1/3 Octave RTA sound level meter (SLM). The desired intensity levels were obtained by making adjustments to the sound files via the Audacity® software.
Results:
All sound files were calibrated at the targeted levels as verified by the value of LAseq.
Conclusions:
Calibration of audio files can be done using a free/open-source software, as all six sound files were successfully calibrated at the targeted levels of 45, 50, 55, 60, 65, 70, 75, and 80dBA. The calibration steps provided in this paper can be easily applied by other researchers for similar purposes, with precautions when calibrating at low levels.
Related Concept Videos
00:53Sound Intensity Level
The human ear can perceive an extensive range of sound intensity, necessitating the use of the logarithmic scale to define a physical quantity—the intensity level. It is a ratio of two intensities and...
01:06Echo
Imagine the sound is reflected back to the ears. Assuming that the source is very close to the human, the difference between hearing the two sounds—the emitted sound and the reflected sound—may be more than the minimum time for perceiving distinct sounds. If this is the case,...
01:01Perception of Sound Waves
The pitch of a sound depends on the frequency and the pressure amplitude of the source. Two sounds of the same...
01:05Intensity and Pressure of Sound Waves
Unlike the time average of a sinusoidal term, which is zero since it is positive...
01:12Instrument Calibration
Analytical Balance Calibration
An analytical balance measures mass and requires regular calibration to...
01:21Perceiving Loudness, Pitch, and Location
Place theory, or place coding, suggests that different pitches are heard because various sound waves activate specific locations along the cochlea's basilar membrane. The brain determines the pitch of a sound by...