Related Experiment Video
Updated: Oct 5, 2025

Spatial Multiobjective Optimization of Agricultural Conservation Practices using a SWAT Model and an Evolutionary Algorithm
Published on: December 9, 2012
A construction strategy for conservative adaptive Kriging surrogate model with application in the optimal design of
Shuangsheng Zhang1, Jing Qiang2,3, Hanhu Liu4
1College of Environmental Engineering, Xuzhou University of Technology, Xuzhou, 221018, China.
Abstract:
When the simulation-optimization model to optimize the groundwater extraction-treatment schemes is used, the construction of a surrogate model for the numerical simulation model has become an effective means to overcome the large calculation load of repeatedly calling the numerical model. However, there are still some problems in using the surrogate model, such as large training sample size, low accuracy, and poor optimization results. In this paper, a conservative adaptive Kriging surrogate model (CAKSM) was proposed by coupling the Kriging surrogate model, optimal solution adaptive sampling method (OSAS), and conservative prediction idea. Firstly, an initial Kriging surrogate model (IKSM) was built for the numerical simulation model of groundwater flow and solute transport. Then, the IKSM was coupled with the optimization model to construct the adaptive Kriging surrogate model (AKSM) by using OSAS. A safety margin was added to the AKSM to build the CAKSM. Finally, the simulation-optimization models based on IKSM, AKSM, and CAKSM were solved by the genetic algorithm, respectively. The results showed that the IKSM could well substitute for the simulation model. The AKSM significantly improved the approximation degree between the surrogate model and the simulation model at the optimal solution by supplementing a small number of new samples. CAKSM could effectively constrain the pollutant mass concentrations within the controlled value, improving the reliability of the optimization scheme. The optimal extraction wells based on different surrogate models were all well 5, well 6, and well 9. They were concentrated in the middle and lower reaches of the contaminated plume's central axis. The sequence for the remediation effects by different surrogate models from high to low was as follows: CAKSM, AKSM, and IKSM. The risk rate of the optimal remediation scheme from the hydraulic conductivity random fields was as high as 12.12%, and the risks were mainly located upstream of the pollution plume's central axis.
Related Concept Videos
Strategies for Assessing and Addressing Confounding
Confounding can be addressed at both the design phase of a study and through analytical methods after data...
Design Example: Analyzing Capacity Contours for Flood Risk Assessment
Design Example: Design of an Irrigation Channel
Conservation of Mass in Moving, Nondeforming Control Volume
In the context of a detention basin, the conservation of mass states that the total mass of water entering the basin must equal the mass leaving the basin plus any accumulation of...
Sampling Plans
Random sampling is a method where each member of the population has an equal chance of being selected for the sample. It involves selecting individuals randomly, often using random number generators or lottery-type methods. For example, when analyzing the properties of a...
Design Example: Alignment of a Road Line Using GIS

