Effects of design and coupling parameters on the performance of electromagnetic transducers in round-window...

Many studies have investigated factors contributing to large variations in the outcomes of round-window (RW) stimulation but most have focused on the floating mass transducer (FMT). To determine whether results for the FMT hold for a fixed-type transducer (FTT), this study constructs two coupled finite element models of the transducer and the human ear that incorporate the cochlear third windows and inner structures of these two electromagnetic transducers. We use these FE models of the human ear and transducers to investigate the influence of four design parameters and coupling conditions for the transducers, i.e., the support's Young's modulus, the coupling layer's cross sectional area and Young's modulus, and the transducer's cross sectional area. The results show that an increase in the support's Young's modulus reduces the output of the FMT but increases that of the FTT. Reducing the cross sectional area and Young's modulus of the coupling layer significantly increases the low-frequency response of the FMT but slightly reduces that of the FTT. Reducing the cross sectional area of the transducer increases the output of the FMT but reduces that of the FTT. This shows that inner structures of electromagnetic transducers should be considered in the optimal design parameters and coupling conditions for RW stimulation.