Related Experiment Video
Updated: Oct 4, 2025

An Anaerobic Biosensor Assay for the Detection of Mercury and Cadmium
Published on: December 17, 2018
Dam cascade unveils sediment methylmercury dynamics in reservoirs
Honghai Ma1, Yuchen Chen2, Qiuwen Chen3
1State Key Laboratory of Hydrology-Water Resources & Hydraulic Engineering, Nanjing Hydraulic Research Institute, Nanjing, 210029, China; Center for Eco-Environmental Research, Nanjing Hydraulic Research Institute, Nanjing 210029, China.
Abstract:
Methylmercury (MeHg) can be bioaccumulated through food chains and adversely affect human health. Reservoirs are reported to stimulate MeHg production, however, the characteristics of MeHg dynamics in cascade reservoirs and the associated relations to sedimentation as well as reservoir properties remained unclear. Here we investigated sediment MeHg dynamics in eight cascade reservoirs in the upper Mekong River. We found significant differences in sediment MeHg concentration between the reservoirs, showing an increase with fluctuations along the reservoirs cascade. However, a novel relationship was found between sediment%MeHg (MeHg/Hg) and the ratio of reservoir hydraulic residence time (HRT) to reservoir age. This relationship is formed by the joint effects of the original deposit of Hg and organic carbon (OC) before impoundment and the subsequent sedimentation of Hg and OC after impoundment. The original deposit is continuously transformed as the reservoir ages, whereas the latter is driven by the annual hydrological cycle and HRT, of which the HRT is dominant. This finding cannot be easily revealed in a single reservoir or by comparing multiple reservoirs in different rivers. The discovery is of great significance to understand Hg geochemical cycling in reservoirs, which is quickly increasing in rivers worldwide.
Related Concept Videos
Design Example: Creating a Hydraulic Model of a Dam Spillway
Conservation of Mass in Moving, Nondeforming Control Volume
In the context of a detention basin, the conservation of mass states that the total mass of water entering the basin must equal the mass leaving the basin plus any accumulation of...
Design Example: Analyzing Capacity Contours for Flood Risk Assessment

