Two-Dimensional Fillers Induced Superior Electrostatic Energy Storage Performance in Trilayered Architecture...

Dielectric capacitors with ultrahigh power densities and fast charging/discharging rates are of vital relevance in advanced electronic markets. Nevertheless, a tradeoff always exists between breakdown strength and polarization, which are two essential elements determining the energy storage density. Herein, a novel trilayered architecture composite film, which combines outer layers of two-dimensional (2D) BNNS/poly(vinylidene fluoride-co-hexafluoropropylene) (P(VDF-HFP)) with high breakdown strength and an intermediate layer made of blended 2D MoS₂ nanosheets/P(VDF-HFP) with large polarization, is fabricated using the layer-by-layer casting method. The insulating BNNS with a wide band gap is able to largely alleviate the distortion of the local electric field, thereby suppressing the leakage current and effectively reducing the conductivity loss, while the 2D MoS₂ nanosheets act as microcapacitors in the polymer composites, thus significantly increasing the permittivity. A finite element simulation is carried out to further analyze the evolution process of electrical treeing in the experimental breakdown of the polymer nanocomposites. Consequently, the nanocomposites possess an excellent discharged energy density of 25.03 J/cm³ accompanied with a high charging/discharging efficiency of 77.4% at 650 MV/m, which greatly exceeds those of most conventional single-layer films. In addition, the corresponding composites exhibit an outstanding reliability of energy storage performance under continuous cycling. The excellent performances of these polymer-based nanocomposite films could pave a way for widespread applications in advanced capacitors.