Recognizing Continuous Multiple Degrees of Freedom Foot Movements With Inertial Sensors

Recognition of continuous foot motions is important in robot-assisted lower limb rehabilitation, especially in prosthesis and exoskeleton design. For instance, perceiving foot motion is essential feedback for the robot controller. However, few studies have focused on perceiving multiple-degree of freedom (DOF) foot movements. This paper proposes a novel human-machine interaction (HMI) recognition wearable system for continuous multiple-DOF ankle-foot movements. The proposed system uses solely kinematic signals from inertial measurement units and multiclass support vector machines by creating error-correcting output codes. We conducted a study with multiple participants to validate the performance of the system using two strategies, a general model and a subject-specific model. The experimental results demonstrated satisfactory performance. The subject-specific approach achieved 98.45% ± 1.17% (mean ± SD) overall accuracy within a prediction time of 10.9 ms ± 1.7 ms, and the general approach achieved 85.3% ± 7.89% overall accuracy within a prediction time of 14.1 ms ± 4.5 ms. The results prove that the proposed system can more effectively recognize multiple continuous DOF foot movements than existing strategies. It can be applied to ankle-foot rehabilitation and fills the HMI high-level control demand for multiple-DOF wearable lower-limb robotics.