Optimizing test approaches for the detection of exposed metal surfaces within a chromatographic flow path

It is critical to the success of any chromatography-based assay that the performance of the LC instrument be checked for its readiness and ability to perform the intended analysis. This includes gaging the suitability of a system to fulfill the purpose of different types of methods. One type of analysis that requires special consideration is the analysis of compounds which are prone to a particular form of non-specific binding, namely metal adsorption, where analytes interact and potentially adsorb to metal contained within the chromatographic flow path. For an analysis of compounds which are susceptible to metal adsorption, ideally a system suitability test would be performed to ensure there will not be any sample loss or detrimental peak shape effects resulting from potential analyte-to-metal interactions. To help chromatographers assess system inertness concerns like this, we have developed a method of testing LC systems for metal interactions using adenosine 5'-(α,β-methylene)diphosphate (AMPcP). This nucleotide analog has been confirmed to have a propensity to adsorb to titanium and stainless-steel frits and is resistant to hydrolysis and stable to long-term storage and repeat use (as is befitting of any reagent proposed for system suitability testing). AMPcP has been used in a flow injection test (no column in-line) to monitor for losses in recovery and peak shape perturbations that can potentially be present in any chromatography system manufactured with one or more metal based components. In this approach, sequential injections of AMPcP were made without a column and various peak attributes were monitored and ultimately correlated to the amount of metal surface area in the flow path. The ability of this method to discriminate between inert chromatographic surfaces versus exposed metal surfaces was verified by comparing peak areas, peak shapes, and injection repeatability for AMPcP using a UHPLC equipped with MP35N metal alloy components versus an equivalent UHPLC equipped with an ethylene bridged hybrid organic-inorganic surface (or so-called hybrid surface technology). Injections of caffeine were also explored to establish a negative control for this system suitability measurement. Caffeine does not interact with metal surfaces and can therefore give an instrument specific representation of peak shape and dispersion as well as an indication of overall mechanical system performance. Additionally, replicate injections of AMPcP and caffeine onto a UHPLC partially configured with hybrid surface technology (HST) readily identified exposed metal surfaces through an increased peak area relative standard deviation as well as a reduction in absolute recovery. Finally, a novel visualization tool was developed to provide an alternative method of determining system inertness without having to perform chromatographic calculations but instead a graphical peak shape comparison between a negative control, caffeine, and the metal sensitive AMPcP test probe.