A Facile Fabrication of PA12/CNTs Nanocomposites with Enhanced Three-Dimensional Segregated Conductive Networks and...

The material design could be very critical in the preparation of conductive polymer composites for electromagnetic interference (EMI) shielding applications. In this work, two methods were proposed to prepare PA12 composite powders coated with CNTs, including ball-milling (BM) and ultrasonic dispersion-liquid phase deposition strategies. Then, by applying selective laser sintering printing (SLS) 3D printing, the segregated network structures were successfully constructed. Various characterization techniques were employed to validate the presence of the formed segregated network structure in the SLS 3D printed parts. The BM SLS 3D printed part at a loading of 5.66 wt % CNTs exhibited an optimum electrical conductivity of 3.0 S/m and an electromagnetic interference shielding (EMI SE) of 23.9 dB (2.0 mm thickness), while its electrical percolation threshold was found to be at 0.347 wt %. However, the EMI SE values of homogenous PA12/CNTs composites prepared by the melt compounding-cryogenic pulverization (MP) method and melt compounding-compression molding were only 9.8 and 15.6 dB, respectively. In addition, the incorporation of CNTs decreased the mechanical performance of the PA12/CNTs printed part due to their negative effect on the sintering. However, such a decrease could be inhibited by increasing the laser energy density. The related investigation could offer a solution to the preparation of the conductive polymer composite and the EMI shielded material through SLS 3D printing processing.