Fabrication of Self-Assembling Carbon Nanotube Forest Fishnet Metamaterials

The investigation of the preparation of polystyrene (PS) nanosphere monolayers for the fabrication of carbon nanotube (CNT) forest fishnet metamaterial structures is studied in this paper, as a cheap alternative for top-down patterning methods. The precise control of dry etching conditions resulted in a highly controlled diameter of PS nanobeads, which were then used as a shadow mask for CNT fishnet preparation. The change of the size of the holes from 370 nm to 665 nm resulted in a gradual change of the CNT morphology from multi-walled to single-walled CNTs. The ultraviolet-visible (UV-Vis) reflectance spectra showed that the variation of the hole diameter resulted in the nonlinear light absorption in CNT fishnets that caused the change of the resonance frequency. The change of the fishnet wire width (inductance) and the hole size (capacitance) resulted in the blueshift of the broadband resonance frequency peak. The presented work has a significant potential to allow for the large-scale fabrication of CNT-based fishnet metamaterial structures for applications in energy harvesting, energy storage, solar cells, or optoelectronic devices, such as neuromorphic networks.