Related Experiment Video
Updated: Oct 3, 2025

The Effect of Construction and Demolition Waste Plastic Fractions on Wood-Polymer Composite Properties
Published on: June 7, 2020
The Durability of Recycled Fine Aggregate Concrete: A Review
Changming Bu1,2, Lei Liu1,2, Xinyu Lu1,2
1School of Civil Engineering and Architecture, Chongqing University of Science & Technology, Chongqing 401331, China.
Abstract:
With the rapid development of urbanization, many new buildings are erected, and old ones are demolished and/or recycled. Thus, the reuse of building materials and improvements in reuse efficiency have become hot research topics. In recent years, scholars around the world have worked on improving recycle aggregates in concrete and broadening the scope of applications of recycled concrete. This paper reviews the findings of research on the effects of recycled fine aggregates (RFAs) on the permeability, drying shrinkage, carbonation, chloride ion penetration, acid resistance, and freeze-thaw resistance of concrete. The results show that the content of old mortar and the quality of recycled concrete are closely related to the durability of prepared RFA concrete. For example, the drying shrinkage value with a 100% RFA replacement rate is twice that of normal concrete, and the depth of carbonation increases by approximately 110%. Moreover, the durability of RFA concrete decreases as the RFA replacement rate and the water-cement ratio improve. Fortunately, the use of zeolite materials such as fly ash, silica fume, and meta kaolin as surface coatings for RFAs or as external admixtures for RFA concrete had a positive effect on durability. Furthermore, the proper mixing methods and/or recycled aggregates with optimized moisture content can further improve the durability of RFA concrete.
Related Concept Videos
Toughness and Hardness of Aggregate
Abrasion Resistance of Concrete
One such test is the revolving disc test, where three plates...
Deleterious Substances in Aggregate
Another type of impurity is clay and fine material that...
Bonding and Strength of Aggregate
Fiber Reinforced Concrete
Design Example: Aggregate Gradation
The grading, or particle-size distribution, of sand is determined using sieve analysis, with standard sizes ranging from 150 μm to 10 mm (ASTM No. 100 sieve to 3⁄8 in. sieve). Sand is...

