Related Experiment Video
Updated: Oct 3, 2025

Dynamic Pore-scale Reservoir-condition Imaging of Reaction in Carbonates Using Synchrotron Fast Tomography
Published on: February 21, 2017
Surface complexation reactions in sandy porous media: Effects of incomplete mixing and mass-transfer limitations in
Lucien Stolze1, Massimo Rolle2
1Department of Environmental Engineering, Technical University of Denmark, Miljøvej, Building 115, 2800 Kgs. Lyngby, Denmark; Earth Sciences Division, Lawrence Berkeley National Laboratory, Berkeley, CA 94720, USA.
Abstract:
Although mixing and surface complexation reactions are key processes for solute transport in porous media, their coupling has not been extensively investigated. In this work, we study the impact of mass-transfer limitations on heterogeneous reactions taking place at the solid-solution interface of a natural sandy porous medium under advection-dominated flow-through conditions. A comprehensive set of 36 column experiments with different grain sizes (0.64, 1.3 and 2.3 mm), seepage velocities (1, 30 and 90 m/day), and hydrochemical conditions were performed. The injection of NaBr solutions of different concentrations (1-100 mM) led to the release of protons via deprotonation reactions of the quartz surface. pH and solute concentration breakthrough curves were measured at the outlet of the columns and the propagation of pH fronts in the column setups was tracked inside the porous medium with non-invasive optode sensors. The experimental results show that the deprotonation of the reactive surfaces, resulting from their interactions with the injected ionic species, strongly depends on the hydrodynamic conditions and differs among the tested porous media despite their apparent similar surface properties. Reactive transport modeling was used to quantitatively interpret the experimental results and to analyze the effects of mass-transfer limited physical processes on surface complexation reactions, propagation of pH fronts, transport of major ions and spatio-temporal evolution of surface composition. A dual domain mass transfer formulation (DDMT) combined with a surface complexation model (SCM) allowed capturing the effects of incomplete mixing on the surface reactions and to reproduce the experimental observations collected in the experiments with high flow velocities. The SCM was parameterized with a single set of surface complexation parameters, accounting for the similar surface properties of the porous media, and was capable of describing the surface complexation mechanisms and their impact on the hydrochemistry over the large range of tested ionic strengths.
Related Concept Videos
Complexation Equilibria: Overview
The equilibrium constant of the complexation reaction is represented as the formation constant...
Colloidal precipitates
Porosity and Absorption of Aggregate
When all pores in an aggregate are filled with water, the aggregate is considered saturated and surface-dry. If left in dry air, water will evaporate until the...
Solubility Equilibria: Overview
Solubility is important in biological and environmental processes. A notable...
Entropy and Solvation
Coagulation

