Quantity and quality characteristics of greywater from an Indian household

Irshad N Shaikh1, M Mansoor Ahammed2

  • 1Department of Civil Engineering, Sardar Vallabhbhai National Institute of Technology, Surat - 395 007, India. shaikhirshad1990@gmail.com.

Related Concept Videos

Quality of Water01:19

Quality of Water

In concrete preparation, the quality of water is paramount as it affects the strength and durability of the concrete. Potable water is usually preferred; however, it must not have excessive sodium or potassium to prevent compromising the concrete's integrity. Water quality is typically evaluated based on impurities such as dissolved solids, chlorides, and sulfates, and its pH value is ideally between 6 and 8. Even slightly acidic natural water may be acceptable unless it contains harmful...
224
Testing Water Quality01:14

Testing Water Quality

When the quality of water for concrete preparation is uncertain, its impact on the setting time of cement and compressive strength of mortar is assessed by comparison with de-ionized or distilled water benchmarks. American Society for Testing and Materials (ASTM) C1602 requires the setting times to be within 90 minutes of the control, British Standard (BS) 3146:1980 allows a 30-minute variance in the initial setting, while British Standards European Norm (BS EN) 1008 specifies initial setting...
204
Design Example: Designing a Residential Plumbing System01:25

Design Example: Designing a Residential Plumbing System

The design of residential plumbing systems requires carefully evaluating water demand, flow rates, and pressure dynamics to ensure both efficiency and reliability. The nature of water flow within pipes is defined by its Reynolds number, which classifies flow as either laminar (smooth) or turbulent.
855
Formation of Dilute Urine01:20

Formation of Dilute Urine

The formation of dilute urine is a critical renal adaptation that maintains fluid balance, particularly during periods of high fluid intake. This process primarily involves the juxtamedullary nephrons. By adjusting the permeability of water and ions in response to physiological conditions, the kidneys can either conserve or excrete water, resulting in concentrated or dilute urine.
Filtrate Osmolarity in the PCT
Initially, as the filtrate passes through the proximal convoluted tubule (PCT), its...
1.9K
Urine: Physical and Chemical Properties01:18

Urine: Physical and Chemical Properties

Urine comprises approximately 95% water and 5% solutes. The primary ingredient, apart from water, is urea - a byproduct of the breakdown of amino acids. Other notable components include uric acid, a residue from nucleic acid metabolism, and creatinine, a metabolite from creatine phosphate breakdown in skeletal muscle tissue.
The concentration of these solutes varies, with urea being the most abundant nitrogenous waste product. Other solutes include sodium, chloride, potassium, phosphate,...
1.6K
Formation of Concentrated Urine01:23

Formation of Concentrated Urine

There is a gradient of solutes in the interstitial fluid from the renal cortex through the medulla, known as the medullary osmotic gradient. The juxtamedullary nephrons establish and maintain this gradient using countercurrent mechanisms with loops extending deep into the medulla. These nephrons also use countercurrent mechanisms to regulate urine volume and concentration. The interaction between the descending and ascending limbs of the nephron loop creates an osmotic gradient through...
2.2K