Related Experiment Video
Updated: Oct 3, 2025

A System to Create Stable Nanoparticle Aerosols from Nanopowders
Published on: July 26, 2016
Study on thermophoretic deposition of micron-sized aerosol particles by direct numerical simulation and experiments
1School of Environmental and Municipal Engineering, Xi'an University of Architecture and Technology, Xi'an 710055, China.
Abstract:
Thermophoresis is of common interest due to its influence on the deposition of particles. Present research on thermophoretic deposition mainly focused on the sub-micron particles, whereas the particle size during the radioactive aerosol monitoring process usually exceeds the range. In order to study the effect of thermophoresis on the deposition characteristics of aerosols ranging from 1 to 10 µm, direct numerical simulation (DNS) and experiments of particle deposition are performed in this paper aiming at still and turbulent flow respectively. The results obtained by DNS coupled with Lagrangian particle tracking (LPT) are validated by the experimental data and the theoretical values. The results indicate that thermophoresis has an influence on the deposition of micron-sized particles, and the effect of thermophoresis on deposition velocity depends on particle size. In the still air, when the temperature gradient is 3000 K/m, the deposition velocity of 1 and 10 µm particles will be increased by 87% and 4.8% respectively when compared with gravitational deposition velocity. In the turbulent flow, the motion of particles is dominated by turbulent motion. In the region near the wall, thermophoresis can increase the deposition rate on the cold wall.
More Related Videos
07:47Experimental Protocol to Investigate Particle Aerosolization of a Product Under Abrasion and Under Environmental Weathering
Published on: September 16, 2016
10:39Fabrication and Characterization of Thickness Mode Piezoelectric Devices for Atomization and Acoustofluidics
Published on: August 5, 2020