Polypyrrole-Bentonite composite as a highly efficient and low cost anionic adsorbent for removing hexavalent...

The aim of current study was to develop a new material for the fast and efficient removal of hexavalent molybdenum (Mo(VI)) from contaminated water. In this work, a novel adsorbent was synthesized through the polypyrrole intercalation modification of bentonite (PPy-BT) via in-situ chemical polymerization method for effectively removal of Mo(VI) from aqueous solution. The surface morphology and chemical composition of PPy-BT composites were investigated by X-ray diffraction, energy-dispersive X-ray spectroscopy, Fourier transform infrared spectrometer, scanning electron microscopy techniques and X-ray photoelectron spectroscopy. PPy and BT could well resist the aggregation of each other, and therefore resulted in a loose-packed structure and good exposure of active sites. Using materials for the adsorption of Mo(VI) revealed has a maximum adsorption capacity of 100.17 mg/g at 25 °C and pH 4.0 by the Langmuir model. The adsorption kinetics and isotherm data are found to be well elucidated through pseudo-second-order and Langmuir models. Moreover, high regeneration ability (>89.3%) of PPy-BT was noted for five consecutive adsorption-desorption cycles. These findings highlight the potential of PPy-BT for practical water treatment applications. The intercalation material of PPy-BT could provide a new strategy to develop cost-effective clay-based nanomaterials for wastewater treatment.