Evaluation of the Versius Robotic Surgical System for Procedures in Small Cavities

The Versius^® is a recently approved robotic surgical system for general surgery procedures in adults. Before any application in children, data of its feasibility and safety in small cavities has to be compiled, beginning with inanimate models. Therefore, the aim of this preclinical study was to assess the Versius^® system for its performance in small boxes simulating small body cavities.

In total, 8 cardboard boxes of decreasing volumes (15.75 L to 106 mL) were used. The procedures, two single stitches with two square knots each, were performed in every box, starting in the largest and consecutively exchanging the box to the next smaller one. The evaluation included procedure time, port placement and pivot point setup, arrangement of the robotic arms and instrumentation, amount of internal and external instrument-instrument collisions and instrument-box collisions.

All procedures could be successfully performed in all boxes. The procedure time decreased due to the learning curve in the first four boxes (15.75 to 1.87 L) and consecutively increased from boxes of 1.22 L up to the smallest box with the dimensions of 4.4 × 4.9 × 4.9 cm³. This may be based on the progress of complexity of the procedures in small cavities, which is also depicted by the synchronous increase of the internal instrument-instrument and instrument-box collisions.

With the use of the Versius^® robotic surgical system, we were able to perform robotic reconstructive procedures, such as intracorporal suturing and knot tying, in cavities as small as 106 mL. Whether this system is comparable or even superior to conventional laparoscopic surgery in small cavities, such as in children, has to be evaluated. Furthermore, before any application in newborns or infants, ongoing evaluation of this system should be performed in a live animal model.