Nanosecond laser pulse modulation using seed electrons from cascade ionization induced by inverse-Bremsstrahlung...

Nanosecond (ns) laser pulses are modulated by seeding electrons on the laser beam path. The seed-electrons are from auxiliary ns-laser-induced breakdown (ALIB), and the ALIB is induced by a focused 1064-nm pulse, which is split after the frequency-doubling that generates the 532-nm pulse; therefore, the 532-nm and 1064-nm pulses are synchronized. The slowly converging (focal length = 500 mm) 532-nm pulse is re-directed to transmit through the region in where the ALIB-generated electrons reside. The seed-electrons from the ALIB then absorb the 532-nm photons via the inverse-Bremsstrahlung photon absorption (IBPA) process. The number density of the seed-electrons on the 532-nm beam path (ne,ALIB) is controlled by varying 1) the 532-nm pulse arrival time at the ALIB region (ΔPAT) after the 1064-nm pulse triggers the ALIB and 2) the location of the 532-nm beam relative to the core of the ALIB; the electron number density in ALIB is highly non-uniform and evolves in time. Electron-seeded laser-induced breakdown (ESLIB) occurs when ne,ALIB is sufficiently high. The 532-nm beam convergence (controlled by the focusing lens) is adjusted so that the breakdown does not occur without the electron seeding. The ESLIB immediately stops the transmission of the trailing edge of the laser pulse acting as a fast shutter, and ne,ALIB above a threshold can cut the pulse leading edge to modulate the 532-nm laser pulse.