Related Experiment Video
Updated: Oct 2, 2025

The Effect of Construction and Demolition Waste Plastic Fractions on Wood-Polymer Composite Properties
Published on: June 7, 2020
Enhancing the In-Plane Behavior of a Hybrid Timber Frame-Mud and Stone Infill Wall Using PP Band Mesh on One Side
Yinlan Shen1,2, Xingchen Yan1,2, Hui Liu3
1Key Laboratory of Urban Security and Disaster Engineering of Ministry of Education, Beijing University of Technology, Beijing 100124, China.
Abstract:
Traditional village dwellings in China consisting of timber frames with mud and stone infill walls represent an important part of cultural heritage and civilization. Due to the lack of an effective link between the wood frame and the infill and the poor cohesiveness of clay, the masonry infill can collapse during an earthquake, whereas the wood frame suffers minimal damage. In this study, current retrofitting techniques for village buildings were investigated and discussed. A method using polypropylene (PP) band mesh and cement mortar to retrofit the timber frame with a mud and stone infill was proposed and the connection construction details were designed. In-plane static cyclic tests were conducted on two full-scale wood-stone hybrid walls reinforced on one side with different grid sizes of the PP band mesh. The failure behaviors of the reinforced and non-reinforced sides of the specimens were compared, and the failure mechanics and seismic capacity of the two specimens, i.e., the strength, stiffness, ductility, and energy dissipation, were investigated. The results were also compared with those of a previous frame with stone infill without pebbles and no reinforcement. The study indicated that the retrofitting method strengthened the integrity and lateral resistance of the hybrid structure and prevented the collapse of the stone infill of the reinforced surface in a plane earthquake. The grid size of the PP band mesh substantially affected the lateral performance of the reinforced specimens. The hybrid wall with the narrow PP band mesh grid (150 mm × 150 mm) had a higher lateral stiffness (79%) and lateral capacity (50%) than the wall with the wide grid (250 mm × 250 mm). However, the narrow PP band mesh resulted in a lower ductility of the wall than the wide PP band mesh. The involvement of pebbles in the stone infill led to collapses sooner and a weaker lateral resistance than in the structure without pebble infill.
Related Concept Videos
Composite Masonry Walls
Posttensioned Masonry Walls
Post-tensioned masonry walls use high-strength steel rods or flexible tendons to enhance the strength and efficiency of masonry structures. These elements are securely anchored to the foundation and extend vertically either within the cores of the masonry units or between the masonry wythes. The construction process involves building the wall with these tensioning elements in place and allowing the mortar to fully cure.
Following the curing process, the tensioning begins. Steel rods are...
Masonry Curtain Walls
Masonry Cavity Walls
Maintaining a clean cavity during construction...
Expansion and Contraction in Masonry Walls
To...
Masonry Loadbearing Walls

