Impact of different source-water switching patterns on the stability of drinking water in an estuarine urban water...

Source-water switching can lead to instability in drinking water distribution systems. In estuarine cities using surface water as source water where salt tide occasionally happens, the influence can be particularly complex due to changes of Larson Index (LI). The objective of this study was to investigate the effects of different switching patterns on the stability of water in an estuarine city. Fluctuated LI was found in the current distribution system. LI of the new source water was lower and more stable. Susceptible areas with a high frequency of over standard water quality were identified and pipe scales there were mainly composed of relatively stable iron oxides with dense crystal structures (Fe₃O₄ and α-FeOOH). Two old pipe sections were used to simulate different switching patterns. The microbial risk did not increase significantly when the original and new water sources were combined in different ratios (2∶8, 5∶5), when multiple water sources were used (3∶3∶4) or when salinity increased. The better water quality, lower LI of the new source water, and stability of the current distribution system together contributed to the biostability. Total iron increased after switching, then declined and stabilized for most switching patterns. Salt tide can lead to sharp iron release. The results provided insightful information for distribution systems that have cast iron pipes and that might encounter source-water switching patterns.