Optimization of the factors affecting BT-2 black tea fermentation by observing their combined effects on the quality...

This research work aimed to optimize the fermentation time, temperature, and relative humidity of the black tea produced from Bangladesh Tea 2 (BT-2) variety by observing their quality parameters. Total theaflavin (TF), thearubigin (TR), the ratio of TF: TR, total liquor color (TLC), high polymeric substances (HPS), and total phenolic content (TPC) were evaluated for quality measurements of BT-2 black tea. Response Surface Methodology (RSM) with Box-Behnken design (BBD) was applied to optimize fermentation time, temperature, and relative humidity as well as evaluate the effects of optimized conditions on the quality of made tea. The results obtained from the response surface optimization affirmed that under the optimum conditions of time (80.14 min), temperature (28.76 °C), and relative humidity (92.30%), the model showed the value of TF (0.69%), TR (5.57%), HPS (8.61%), TLC (3.05%), and TPC (7.95 GAE g/100g tea). Moreover, the optimized model found that the TF:TR value was 1:9.13, which is close to black tea's optimum quality. The values observed in experiments were highly congruent with the predicted value by the regression model. The Analysis of Variance (ANOVA) test revealed that the model was significant for TF, TR, HPS, TLC, TPC, and TF:TR values of prepared BT-2 black tea at different levels (p < 0.001 to p < 0.01). The composite desirability of the model was 0.93, which suggests that the developed model could be utilized effectively to maintain the quality parameters of BT-2 black tea during fermentation.