Related Experiment Video
Updated: Oct 1, 2025

Dissolution Dynamic Nuclear Polarization Instrumentation for Real-time Enzymatic Reaction Rate Measurements by NMR
Published on: February 23, 2016
Enhanced-solubilization and dissolution of multicomponent DNAPL from homogeneous porous media
GeoffreyR Tick1, David R Slavic1, Nihat Hakan Akyol2
1Department of Geological Sciences, The University of Alabama, Tuscaloosa, AL 35487, USA.
Abstract:
The presence of multicomponent dense nonaqueous phase liquid (DNAPL) mixtures in porous media can significantly limit the effectiveness of groundwater remediation. A series of column transport and flushing experiments were conducted to quantify the impact of various enhanced flushing agents on dissolution and removal of a multicomponent DNAPL source within a macroscopically homogeneous porous medium. The columns were established with NAPL saturations consisting of an equal mole mixture of cis-1,2-dichloroethene, trichloroethene, and tetrachloroethene. The solubilization agents used included two complexing sugars - hydroxypropyl-β-cyclodextrin (HPCD and methyl-β-cyclodextrin (MCD); a surfactant - sodium dodecyl sulfate (SDS); and a cosolvent - ethanol (EtOH). The chemical flushing agents greatly reduced the time needed to remove each DNAPL component, compared to flushing with water alone. Initial DNAPL-component elution concentrations were successfully predicted using Raoult's Law for MCD, HPCD, and water flushing, indicating that ideal dissolution was initiated by the lower-power enhanced-solubilization agents. EtOH was most efficient at removing the contaminants in terms of normalized mass recovery but least efficient based on a mass-ratio and mole-ratio of contaminant to reagent analysis. SDS was most efficient for contaminant removal when analyzed based on mass-contaminant to mass-reagent recovered and MCD was most effective based on a moles-contaminant to moles-reagent recovered efficiency evaluation. However, in terms of mass flux reduction analysis (i.e. removal metric), SDS was least efficient for contaminant removal compared to all other enhanced-flushing agents tested, especially during the initial stages of DNAPL removal. Results from this study indicate that ideal dissolution was initiated during enhanced-solubilization and that several criteria should be used to evaluate the removal effectiveness of flushing agents for multi-component NAPL systems.
Related Concept Videos
Factors Affecting Dissolution: Drug pKa, Lipophilicity and GI pH
A drug's pKa and the pH of the gastrointestinal (GI) tract play crucial roles...
Factors Affecting Dissolution: Particle Size and Effective Surface Area
Solubility
A solution is a homogeneous mixture composed of a solvent, the major component, and a solute, the minor component. The physical state of a solution—solid, liquid, or gas—is typically the same as that of the solvent. Solute concentrations are often described with qualitative terms such as dilute (of relatively low concentration) and concentrated (of relatively high concentration).
In a solution, the solute particles (molecules,...
Factors Influencing Drug Absorption: Drug Dissolution
Theories of Dissolution: Diffusion Layer Model
This process starts with a thin layer, saturated with the drug, forming at the interface between the solid and liquid. The solute then diffuses from this layer into the main solution. The Noyes-Whitney equation suggests that the rate of dissolution relies on the diffusion...
Factors Affecting Dissolution: Polymorphism, Amorphism and Pseudopolymorphism
Some polymorphic crystals possess lower aqueous solubility than their amorphous counterparts, leading to incomplete absorption. For instance, the oral suspension of Chloramphenicol, which...

