Related Experiment Video
Updated: Oct 1, 2025
Agarose Fluid Gels Formed by Shear Processing During Gelation for Suspended 3D Bioprinting
Published on: May 26, 2023
The development and optimisation of gastro-retentive floating tablets using fused deposition modelling 3D printing
Sinmisola A Oladeji1, Suha M Dadou1,2, Min Zhao1,2
1Pharmaceutical Engineering Group, School of Pharmacy, Queen's University Belfast, Belfast, UK.
Objectives:
To develop a robust tablet design for the manufacture of gastro-retentive tablets using fused deposition modelling three-dimensional printing (FDM-3DP) that can provide prolonged gastric residence time with instant floating and minimum influence of process and/or formulation variables.
Methods:
Three different polymers, such as polyvinyl alcohol (PVA), hydroxypropyl cellulose (HPC) and Soluplus were used, separately, for the manufacture of tablets using FDM-3DP. Tablets were designed in a sandwich model that included voids in the internal structure to support buoyancy.
Key Findings:
Fabricated tablets from all polymers were instantly buoyant with no floating lag time. Floating duration was in the order: HPC > Soluplus > PVA which can be explained by the density of the tablets. PVA tablets exhibited significantly (P < 0.05) higher density values (0.86 ± 0.02 mg/mm3) than HPC and Soluplus (0.69 ± 0.03 and 0.72 ± 0.02 mg/mm3, respectively). HPC and Soluplus showed similar zero-order drug release profiles (f2 > 50) and were able to sustain the release of theophylline for 12 h, whereas complete drug release was achieved from PVA tablets after 3 h.
Conclusions:
Robust gastro-retentive tablets that show instant buoyancy regardless of the polymeric carrier type and composition were successfully manufactured utilising FDM-3DP. This allows for overcoming the restrictions posed by process/formulation parameters on the floatability of gastro-retentive tablets.
