Numerical and Experimental Analysis of Titanium Sheet Forming for Medical Instrument Parts

The paper analyses the forming of the surgical instrument handles made of Grade 2 titanium sheets. Sheet metal forming is a technology ensuring high strength and light weight of products. Replacing stainless steels with titanium further reduces instrument weight and additionally provides the required resistance to corrosive environments typical for surgeries. The low instrument weight is important to prevent fatigue of surgeons and allow them to maintain high operational accuracy during long term surgeries. The numerical analysis of the technological process was performed in order to adapt it to forming tool handles using titanium sheets instead of steel sheets. The numerical calculations were experimentally verified. It was found that, in the case of titanium handles, it is necessary to use a blank holder in the first forming operation to eliminate sheet wrinkling in the flange area. The shape and dimensional accuracy of the drawn part after trimming were high enough and the 4th forming operation became unnecessary. Moreover, the process modification included lubrication using rapeseed oil with the addition of boric acid, which effectively prevents the galling of titanium on the working surfaces of the steel tools and ensures a more uniform distribution of plastic strains in the drawn part.